Cattle Panel Trellis: DIY Arch for Your Garden - The Miller Acres (2024)

I think I first saw a cattle panel trellis on Bre Ellis’ Youtube channel. At one point, she had a trellis tunnel covered in beautiful greens, melons, and loofah. The more that I researched about cattle panel trellises, the more that I realized that they not only add beauty to the garden but also save space at a fraction of the cost of other garden trellises.

Our garden is made up of two raised beds and 18 in-ground beds with a pathway separating the garden into two columns. We decided to add three cattle panel trellises to our garden. Keep reading to find out how to make your own cattle panel trellises!

Cattle Panel Trellis: DIY Arch for Your Garden - The Miller Acres (1)

Shoes: Nisolo shoes Huarache Sandals in Desert Rose (save 20% with code THEMILLERACRES)

This post may contain affiliate links, and I may earn a small commission when you click on the links at no additional cost to you. I only recommend products that I would use myself and hope that these resources are beneficial to you.

Benefits of Trellising

As I mentioned above, garden trellises are not only beautiful but are also beneficial to plants and the garden as a whole.

Cattle Panel Trellis: DIY Arch for Your Garden - The Miller Acres (2)

  1. Vertical Growing Space: A trellis provides vertical growing space, allowing plants to grow upwards instead of sprawling on the ground. This is especially beneficial for vining plants like tomatoes, cucumbers, peas, and beans. By growing vertically, these plants can maximize their exposure to sunlight and optimize their growth.
  2. Increased Yield: When plants are trained to grow on a trellis, they can produce a higher yield. The vertical growth allows for better air circulation and sunlight penetration, which promotes healthier plants and encourages more abundant fruit or flower production.
  3. Space Efficiency: Trellises are excellent space-saving solutions for small gardens or limited areas. By utilizing vertical space, you can grow more plants in a compact area without overcrowding or shading other plants. This can be particularly helpful in urban or container gardens.
  4. Improved Air Circulation: Growing plants on trellises allows air to circulate more freely around the foliage. This increased airflow helps prevent the development of diseases, such as fungal infections, by reducing humidity and allowing the plants to dry more quickly after rainfall or irrigation.
  5. Easier Plant Maintenance: Trellises make it easier to tend to your plants. Pruning, training, and harvesting become more accessible when plants are growing vertically. You can easily access the fruits, flowers, or foliage without having to bend down as much.
  6. Pest Control: By elevating plants off the ground, trellises can help deter some pests. Crawling insects and ground-dwelling creatures may find it more challenging to access the plants when they are growing vertically.

These are just a few of the benefits of adding a trellis to your garden, especially if you are working within limited space.

Cattle Panel Trellis: DIY Arch for Your Garden - The Miller Acres (3)

Types of Vegetables that Can Trellis

This year, we planted indeterminate tomatoes, zucchini, and cucumbers on our cattle panel trellises. So far, the cucumbers are filling out the trellises well. The tomatoes are a little sparse, and the zucchini, while thriving, is more difficult to train to grow up the trellis.

You can train vegetables or fruit to climb a garden trellis, but you can also train gorgeous pollinator flowers. This year, my garden has struggled with pollination. Many of my plants are producing a significant amount of flowers but little to no fruit. I’m hoping to add in more pollinators to my garden to encourage more bees to visit.

Here are a few other suggestions for vegetables, fruits, and flowers to grow on a cattle panel trellis:

Cattle Panel Trellis: DIY Arch for Your Garden - The Miller Acres (4)

  1. Vining Vegetables: Many vegetable plants are well-suited for trellises. Common options include tomatoes, cucumbers, pole beans, peas, and squash. These plants have trailing or climbing habits and can thrive when trained to grow vertically.
  2. Melons: Some smaller melon varieties can be trained to grow vertically. Examples include compact or bush-type watermelons or cantaloupes. These plants require strong support and appropriate training to ensure the trellis can bear the weight of the developing fruits.
  3. Climbing Roses: Climbing rose varieties can be trained to grow on trellises, creating a stunning display of blooms. They add beauty, fragrance, and a touch of romance to your garden.
  4. Grapes: Grapes are natural climbers and can be trained to grow on trellises. They require sturdy support and proper pruning, but they reward you with delicious fruits for eating fresh or making wine.
  5. Climbing Hydrangeas: These flowering vines produce clusters of beautiful, showy blooms. Climbing hydrangeas can be trained to grow on trellises, walls, or fences, adding charm and elegance to your garden.
  6. Clematis: Clematis vines are known for their vibrant, eye-catching flowers. They come in a variety of colors and bloom shapes. Clematis can be trained to grow on trellises, arbors, or pergolas.
  7. Sweet Peas: Sweet peas are fragrant, delicate flowers that come in a range of colors. They are popular for their enchanting scent and make excellent additions to trellises, adding beauty and fragrance to your garden; although, they are not edible.
  8. Wisteria: Wisteria is a woody vine that produces long, cascading clusters of fragrant flowers. With their stunning floral display, wisteria vines are often trained to grow on trellises, arbors, or pergolas.

These are just a few options to add to your garden! Next year, I think I will plant cucumbers, melons, and pollinators on our trellises.

Cattle Panel Trellis: DIY Arch for Your Garden - The Miller Acres (5)

Getting Supplies for the Cattle Panel Trellis

We don’t have a truck, so I had some trouble figuring out how to get the cattle panels to our house. A few options were to rent a truck, borrow a truck, try to strap them to the top of our minivan, or find a place that delivered. Cattle panels are available at Tractor Supply, Sutherlands, sometimes Home Depot, and local farm supply stores.

We have a lot on our plate right now, so the easiest option was finding a place that delivered. I called around and found a local place that delivered three panels for $30 total. It was less than it would have cost us to rent a truck, and it was a whole lot more convenient too!

Cattle Panel Trellis: DIY Arch for Your Garden - The Miller Acres (6)

If you are having trouble transporting cattle panels, I highly recommend calling local farm stores (if you have any) and seeing if they will deliver.

We already had t-posts on hand, but they are fairly inexpensive and are available for purchase at stores like Home Depot, Menards, or Lowe’s. Zip ties are available at many local stores or on Amazon.

Carson’s friend from work had a friend who owned a t-post driver. He generously loaned it to us for free. If you are planning on doing a significant amount of fencing, it may be worth it to purchase, rent, or borrow your own. You could also use a rubber mallet if you don’t have a driver available to you.

Cattle Panel Trellis: DIY Arch for Your Garden - The Miller Acres (7)

Materials Needed for One Cattle Panel Trellis

16 ft. x 50 in. cattle panel

4 6 ft. t-posts

UV resistant zip ties

T-post driver or mallet

Cattle Panel Trellis: DIY Arch for Your Garden - The Miller Acres (8)

How to Build the Cattle Panel Trellis

The trellises were not hard to build, but they were a little awkward and required two people to bend the fencing into place.

Although you could adjust the spacing to fit your garden, we placed the t-posts that were straddling the garden beds about 3 feet apart. These posts were 5 feet away from the posts on the opposite side.

First, we measured and put rocks where we wanted the posts. Carson drove the t-posts into the ground using the t-post driver with the grooves on the posts facing inward. The posts straddled the garden bed on each side as pictured below.

When securing the t-posts in place, Carson took one end of each panel and I took the other. We bent it into place, creating an arch over the pathway. Then, we secured the panel into place with the zip ties. The panels were not extremely heavy, but they were a little awkward and difficult to maneuver.

Cattle Panel Trellis: DIY Arch for Your Garden - The Miller Acres (9)

Cattle Panel Trellis Training Tips

It is helpful to thin out the plants and prune them as they begin to grow. This encourages new growth and keeps good air flow at the base of the plant. You can use garden pruning shears or scissors for pruning.

You’ll also need some garden ties or twine to train the plants to grow up your trellis. Otherwise, they will grow all over your garden pathways and beds! I use a combination of tomatoes ties, wire, and twine.

Cattle Panel Trellis: DIY Arch for Your Garden - The Miller Acres (10)

Other Trellis Options

If you are unable to get cattle panels to your house or want a different type of trellis option, click HERE for some other types of trellises you could order online and use.

Cattle Panel Trellis: DIY Arch for Your Garden - The Miller Acres (11)

Our Overall Garden Plan

I have shared our garden layout in a previous post, but if you are starting from scratch and need some garden design ideas, this is what we did this year.

Our raised beds are 4 feet wide by 10 feet long by 10 inches tall (4ft x 10ft x 10in). We are using the raised beds for perennials that will come back year after year like rhubarb, strawberries, asparagus, and herbs. I am also planting seasonal companion plants like garlic, spinach, and kale in the beds. Get my FREE companion planting guide here for a list of the best companion plants to improve your harvest!

Cattle Panel Trellis: DIY Arch for Your Garden - The Miller Acres (12)

Our no-dig garden is directly behind our raised beds. It is 26 feet wide by 36 feet long. Behind each raised bed, there are 9 no-till beds. Each bed is 30 inches wide and 10 feet long. We have a center aisle that is two feet so that we can fit our wheelbarrow down the middle. I chose 30 inches for the beds and 18 inches for the rows.

As I mentioned above, we included three trellises that arch over the garden pathway. Next year, we would love to add some fencing. Although our entire property is fenced, we have had some issues with animals getting into the garden and think that fencing would significantly improve this problem! It would also allow us to free-range our chickens without supervision.

Cattle Panel Trellis: DIY Arch for Your Garden - The Miller Acres (13)

Other Garden Resources

Check out these other blog posts about starting seeds, no-till gardening, and homesteading skills!

Seeds I Ordered for My Garden

How to Start a No-Till Garden

Seed Starting Supplies

Homesteading Skills that Don’t Require Land

I’d love to see if you make your own cattle panel trellis! Tag me on Instagram if you make your own.Cattle Panel Trellis: DIY Arch for Your Garden - The Miller Acres (14)

Related

4

Cattle Panel Trellis: DIY Arch for Your Garden - The Miller Acres (2024)

FAQs

How wide should a cattle panel trellis be? ›

Plus, the openings—measuring from 4 to 8 inches—are large enough to easily reach through to harvest your crops. Cattle panels range between 8 and 16 feet wide and are usually 50 inches tall, allowing them to cover a large area and be used in a variety of ways in the garden.

Which direction should trellis face? ›

Another question I get asked a lot is about the orientation of the trellises. Any structure is going to block sun, but if you run trellises north to south, they block it less.

What is the spacing for trellises? ›

Distance between curtains ranges from 2 to 4 feet, depending on desire to mechanize harvest. Spacing between vines is 6 to 8 feet. Spacing between rows is 11 to 12 feet.

How do you make a DIY trellis? ›

6 Easy Steps to Build Your Own Trellis
  1. Step 1: Select your branches. Scout out branches in your yard that are about 2" thick. ...
  2. Step 2: Clean up branches. ...
  3. Step 3: Choose your metal wire.
  4. Step 4: Wrap branches together.
  5. Step 5: Position trellis.
  6. Step 6: Weave plants into place.

How long is a cattle panel trellis? ›

Cattle panels usually measure 16 feet long by about 50 inches wide, and the openings in the grid range from 4 to 8 inches, with some variation depending on the model and manufacturer. (If you need a smaller size, cut the panels using a manual bolt cutter.)

How far should a trellis be from the house? ›

A: Most trellises have a footing that allows them to stand about three to four inches off the wall. They're usually not bolted to the wall because you need space for the vine to grow.

How deep do posts need to be for trellis? ›

As a general rule, the posts need to be set approximately 600mm (2ft) into the ground. After the hole is dug place the post into the ground using a spirit level to make sure the front of the post is carefully aligned along the string line.

Where is the best place to put a trellis in a garden? ›

The trellis might be the perfect filler for an empty spot in the garden, or even for a part of the garden that's not so nice to look at. A perfect spot might simply be the place where you grow climbing plants, whether these are flowering plants like climbing roses or a simple climbing cucumber.

Where should a trellis be placed in a garden? ›

Choose the right location to garden vertically – Trellises can block the sun from reaching your garden if placed in the wrong location. To maximize sunlight, position trellises on the north edge of your garden bed or next to a fence or wall.

How do I keep my trellis from blowing over? ›

If you don't want to invest in new metal stakes, another option is pounding short stakes into the ground at the ends of your trellis, then tying heavy string from the top of your tall stakes to the short stake. This creates a "guy wire" setup that creates enough tension to give a lot more support to the trellis.

Where should an arch trellis be placed? ›

Positioning

It's usually best to place it in the center or on one of the sides so that the plants can grow against and over the arch. It's recommended to leave a space of 4 to 5 feet in the arch for a person to walk by with a basket or tools, especially if you do a lot of work in your garden.

What is the maximum height for a trellis? ›

Some authorities permit trellises to extend beyond the 2-metre fence height restriction, on the condition that the trellis itself does not serve as a further barrier and is solely used for supporting plant growth. The rationale behind this allowance is based on privacy concerns.

How do you support cattle panels? ›

Support cattle panels with rigid poles from the hardware store. For a rustic look, use 3/8″ or 1/2″ rebar, depending on the length of the support. (The longer the support, the thicker and stronger the rebar needs to be.) For a more refined look, try 1/2″ galvanized conduit.

Top Articles
Latest Posts
Article information

Author: Rob Wisoky

Last Updated:

Views: 6241

Rating: 4.8 / 5 (68 voted)

Reviews: 91% of readers found this page helpful

Author information

Name: Rob Wisoky

Birthday: 1994-09-30

Address: 5789 Michel Vista, West Domenic, OR 80464-9452

Phone: +97313824072371

Job: Education Orchestrator

Hobby: Lockpicking, Crocheting, Baton twirling, Video gaming, Jogging, Whittling, Model building

Introduction: My name is Rob Wisoky, I am a smiling, helpful, encouraging, zealous, energetic, faithful, fantastic person who loves writing and wants to share my knowledge and understanding with you.